This question is dependent on several factors. The first is how often you use the evaporative cooler. It may need to be cleaned more often if you live in an extremely dry area. It should be cleaned at least three times per year before it is used after it has been used and before it goes into storage.
You should drain the water tank, and then refill it once per month. This will prevent the air from becoming musty, and allow you to freshen the smell if necessary. You should also check the condition of your cooler every three months to make sure it is clean.
It is important to inspect your unit regularly and clean it after heavy use. If you want to maintain your unit’s top condition for as long as possible and prevent the growth of mold and mildew, this is the best advice.
It isn’t difficult to clean and maintain your evaporative cooler. You can clean and tune up your entire unit in a matter of hours if you have the right knowledge.
You only need the tools necessary to drain or open your unit. Water is sufficient, except for vinegar and a sponge. It is important to do this maintenance regularly. Regular maintenance will reduce the chance of deposits and you won’t need to scrub as often.
The evaporative cooler pads need to be watched and inspected regularly. You need to be careful with the pads of your evaporative cooler because they are almost always damp.
Mold and mildew can cause serious allergic reactions in people who breathe the air. Your pads are the most important component of an evaporative cooler. They should be maintained regularly and properly.
Check The Cooling Pads Of Your Unit
Cooling pads are a vital part of any evaporative system. They are more susceptible to mildew because they can stay wet for long periods.
If you find mold or mildew on your pad, it is best to throw them away. Mold and mildew can cause breathing problems by introducing allergens into the air.
There are two types of pads that you can choose from if you want to replace them. There are two types of cooling pads: rigid media cooling pads and fiber pads. Some pads can be tailored to your machine while others might need to be cut to size. If the former, keep your old pads handy so that you have a reference point for how big to cut the new pads.
How To Clean Your Cooling Pads?
If your cooling pads are clean and free from mold and mildew, you can simply clean them instead of replacing them.
You will first need to clean the vacuum cleaner of any loose material. Then, you can simply take the pads outside and rinse them with a hose. You can continue this process until all water has evaporated. You can then reinstall your pads in the unit, even if they are still damp. This will help it run more efficiently.
If your pads are prone to calcium deposits, it may be necessary to go one step further. If the calcium deposits are extremely hard to remove, it might mean that the pads should be replaced. However, this is not necessary if the deposits are stubborn and persistent.
This will again require the use of high-acidic distilled white vinegar with water. You will likely need to mix about three cups of vinegar with water in a large bucket. This allows you to dip a wire brush, or another tough scouring instrument into the vinegar.